Lesser Known Fire Alarm Panel/Device Companies

Discussion of all things related to fire alarms, including alarm systems, fire alarm collections, sirens, sprinklers, fire drills, evacuations, actual fires, building architecture, other kinds of safety drills like tornado and earthquake drills and such, etc.
Post Reply
User avatar
Gentex Guy
Casual Participant
Casual Participant
Posts: 44
Joined: Wed Aug 05, 2020 12:50 am
YouTube Username: Gentex Guy
Contact:

Anyone know of any companies that manufacture fire alarm panels or fire alarm devices like that aren't as widely known as other companies like Simplex/Johnson Controls or Honeywell?
User avatar
El Chupacabra
Serious Participant
Serious Participant
Posts: 322
Joined: Sun Jan 08, 2012 8:01 pm
Location: Ottawa, ON

Here are a few smaller (but not necessarily lesser-known) companies that are active on the North American market:
- Firecom
- Nittan
- Hochiki
- Spectronics
- Maple Armor
- VES
- Advanced

I'm not sure whether Spectronics is still active; their website does not appear to have been updated since the late '90s/early 2000s. However, Street View shows that their sign was still up on their headquarters in 2019.

Most of the companies mentioned above rebrand at least some of the products they sell (typically initiating devices and signals, although some companies, such as Nittan, also rebrand panels). Maple Armor appears to be the only one that manufactures everything in-house.
User avatar
Gentex Guy
Casual Participant
Casual Participant
Posts: 44
Joined: Wed Aug 05, 2020 12:50 am
YouTube Username: Gentex Guy
Contact:

El Chupacabra wrote: Thu Aug 06, 2020 8:15 am Here are a few smaller (but not necessarily lesser-known) companies that are active on the North American market:
- Firecom
- Nittan
- Hochiki
- Spectronics
- Maple Armor
- VES
- Advanced

I'm not sure whether Spectronics is still active; their website does not appear to have been updated since the late '90s/early 2000s. However, Street View shows that their sign was still up on their headquarters in 2019.

Most of the companies mentioned above rebrand at least some of the products they sell (typically initiating devices and signals, although some companies, such as Nittan, also rebrand panels). Maple Armor appears to be the only one that manufactures everything in-house.
Interesting! I've heard of Firecom mainly because they had a system in the original WTC 7 in New York, and there's a video of it going off on YouTube during 9/11. I believe I've heard of Maple Armor but besides that, those are all new names to me! I think I'll check them out!
Proud owner of a Fire-Lite MS-2 system that drives my parents crazy!
Check out my YouTube channel!
User avatar
RSSAlarms
Serious Participant
Serious Participant
Posts: 349
Joined: Fri Jul 20, 2018 9:26 pm
YouTube Username: RSSAlarms
Location: Portland, OR
Contact:

There’s also a company called Tele-Call, which is an Ohio based fire and security company. Old School Fire Alarms has a video of a Tele-Call system: https://youtu.be/EqypVuxpw0I
User avatar
El Chupacabra
Serious Participant
Serious Participant
Posts: 322
Joined: Sun Jan 08, 2012 8:01 pm
Location: Ottawa, ON

Another brand I forgot to mention in my previous post is Nohmi Bosai. Their N3060 panel looks pretty interesting, while their S508 panel appears to be a rebranded Potter product.

I also just realized that VES and Hochiki both seem to offer identical products. These two brands are related, according to VES' website.
BigKayCea
Casual Participant
Casual Participant
Posts: 176
Joined: Tue Apr 05, 2016 7:34 am

National Time & Signal Corporation is not widely known outside of the State of Michigan, where the company is headquartered. They used to manufacture their own NAs and pull stations, but they now re-brand those from Gentex and Sigcom, respectively. However, they do still manufacture their own panels.
wiley209
Dedicated Participant
Dedicated Participant
Posts: 1135
Joined: Mon Apr 02, 2007 7:04 pm

One lesser-known company that's kind of local to my area is Protectowire, the makers of the BG-50 pull station. They're based in Pembroke, MA, and the only Protectowire fire alarm system I've seen in the field so far was the Knights of Columbus building in Pembroke; they have a Protectowire SRP4x4 fire alarm panel that also has a Notifier FireVoice-25/50 voice-evac panel and a Silent Knight power supply panel tied into it. The alarm signals are the older bulky-looking SpectrAlert speaker/strobes, and there are also Hochiki smoke detectors and Sigcom T-bar pulls rebranded by Protectowire. I was only at this place a couple of times for Halloween parties, and I've never even heard of Protectowire until I first saw that system in 2010.
User avatar
RSSAlarms
Serious Participant
Serious Participant
Posts: 349
Joined: Fri Jul 20, 2018 9:26 pm
YouTube Username: RSSAlarms
Location: Portland, OR
Contact:

What about Spectronics?
User avatar
Fire Alarm Fan
Serious Participant
Serious Participant
Posts: 606
Joined: Thu Apr 05, 2007 9:19 am
Location: Austin, MN

Kingfisher Company (KCi) — mainly radio transmitter systems but also have rebadged initiation devices.

United Security Products — made an electronic horn/strobe which looked like a 7002 but with a circular grill rings. There were 2 variants we know of: a horizontal strobe with Arial or Helvetica font on the lens and a vertical strobe with the same font as the MASS. The only known video of one is a blue painted one used for a parking ramp exit alarm. Now mainly make dialers and holdup buttons.
Newest FA Device: Gamewell M69 pulls
Coming Soon:
Newest Smoke: BRK 79R
DilanIsAlarmed_
Registered User
Registered User
Posts: 3
Joined: Wed Jul 08, 2020 12:18 am
YouTube Username: Dilan's Creations
Contact:

Fire Alarm Fan wrote: Thu Aug 13, 2020 1:30 pm Kingfisher Company (KCi) — mainly radio transmitter systems but also have rebadged initiation devices.

United Security Products — made an electronic horn/strobe which looked like a 7002 but with a circular grill rings. There were 2 variants we know of: a horizontal strobe with Arial or Helvetica font on the lens and a vertical strobe with the same font as the MASS. The only known video of one is a blue painted one used for a parking ramp exit alarm. Now mainly make dialers and holdup buttons.
The only time I've seen KCi panels were on the recently de-privatized fire drill videos by Capt421, in a few Connecticut schools. One of them a (variable?) relay to drive AC simplex 4040s and the IDC(s) had older flush-mount Gamewell non-coded hook pulls.
Old school IBM/Simplex/Autocall fanboy :wink:
Post Reply