I’ve actually been collecting for a little more than 7 years, so here’s what I have (will be sorted by brand).
Wheelock
- MT-24-LSM (2x; b/c I originally thought that the strobe on the first one I bought was broken until I discovered that there was a loose connection in the strobe a few years later)
- RSSP-24MCW strobe plate
- 7002T
- MT-12/24-R horn
- 36T-24 (basically the same thing as the 34T, except it has a different volume range)
- MT-24-MCW (2x; I probably will ship the extra one to another collector since I got both of them at the same time)
- E50 speaker/strobe
System Sensor
- MASS2415ADA
- SpectrAlert “Classic” P24110 (1st gen., has a delay before sounding)
- SpectrAlert “Classic” S1224MC Remote Strobe
- SpectrAlert Advance P4R Horn/Strobe
- SpectrAlert Advance SPSR Speaker/Strobe
Gentex
- GXS-4-15/75WR
- GMS24-1575WR
- Commander3 Horn/Strobe (GEC3-24WR)
- GOS24-110WR
Simplex
- 4903-9101 Strobe Plate
- 4903-9102 Light Plate
- 2901-9838 Horn (2x; both black-plated; 1 came with -9101 Strobe Plate, high pitched; the other came with the -9102 light plate, low pitched)
- 4901-9822 Electronic Horn
- 2099-9795 (addressable module removed)
- 4903-9236 Horn/Strobe
- 4903-9219 Horn/Strobe (2x; strobe is dead on one of them, will get replaced – see below – and will eventually become a 4903 custom A/V and the horn will be attached to a U-HNH-MCS shell)
- 4904-9137 Remote strobe (2x; one of them is going to be used to replace the strobe on one of my -9219s, and the bracket is where I’m going to put the broken strobe on for the heck of it)
- 4903-9425 TrueAlert Horn/Strobe (strobe died, SmartSync switch broken, one of the horn terminals got cut off somehow)
- 2099-9754 Single Action T-Bar
- 4901-9805 Horn
- 2901-9806 Horn
- 2099-9756 (loose push bar, broken terminal; may need to replace it with a 2099-9757, preferably with the small hourglass logo)
- 4251-20
- 4901-9820 TrueAlert horn
- 4904-9101 remote strobe
- 4902-9716 TrueAlert speaker
- 4905-9938 SmartSync module
- 4906-9101 TrueAlert strobe
- 4906-9127 TrueAlert horn/strobe
- 2901-9840 horn (silver/chrome plated)
- 4903-9501 retrofit mounting base plate + 4904-9105 strobe
- 2901-9836 (Gentex GX90-4R mini horn)
Edwards/EST
- 270-SPO (2x; one of them GE branded, most of the paint chipped off, screwdriver reset thing rendered impossible to reset)
- 279B-1120 (same thing as a 278B-1120 except it uses wire leads rather than screw terminals)
- Enhanced Integrity Horn/Strobe (757-7A-T) (The “FIRE” lettering on one side got messed up somehow)
- Genesis remote strobe (G1RF-VM) (Bought this thinking it was the horn/strobe since the box it came in was for the horn/strobe, and was even listed as a horn/strobe on eBay)
- Genesis horn/strobe (G1RF-HDVM)
- ANS100 VECP (Got this from Destin a while back; came with the Wheelock E50; don’t get too excited, it may be a while before I showcase it on YouTube)
Other brands
- Notifier BGX-101L (originally addressable, now converted to an NBG-10L)
- Fire-Lite BG-12L (2x, one of them rigged so that it can be opened up w/o the key, originally addressable, also roughed up)
- Federal Signal V1971 “iStrobe” + MPV duplex mounting plate
I once had a Wheelock AS horn/strobe (fixed at 110cd) as my very first alarm, but, unfortunately, I had since sent it to someone by the name of “eddieeddieeddie13” on YouTube.
More alarms I plan to get include but are not limited to: Wheelock NS, Wheelock AS (White), System Sensor MDL sync module, another 7002T, another 2901-9838 (except silver/chrome plated), Simplex 2902-9732 LifeAlarm speaker, 2902-9734 LifeAlarm speaker, and many others.