7002T's alarm collection

It’s been a while since I posted pics of my collection. It’s much bigger than it was so I’ll go over what I have, and post some pics I have laying around.

Panel: The trusty MS-4424B. I’ve had it now for close to 12 years, and have had it powered up for 8 years with a 4251-20, genesis chime/strobe, i3, and Honeywell labled 2400 hooked up, all will be finally installed properly sometime next year.

Now for a general assortment of pics: WARNING: picture overload

Assorted alarms thawing after my back patio leaked and froze a few winters ago. Despite some ice in some of the strobes nothing was damaged. In this pile you’ll see: P2RK, a P2R which I no longer have, 9838, several 4051s, older 350, newer 350+PR2, Amseco motor horn, FS HOS strobe, several GX-93R GMH, and SHGs, 874 Adaptahorn attached to a push button, IBM 4031-2B, Auth electric horn (single goose neck), 34T, 34, MA/SS (set to slow whoop), PA400R in it’s box, 4251-20, a dead EST strobe (wires were cut down to the board by the previous owner), 2 MT4-LSM (set to code-3 horn), AS, EHS-DL1, Several simplex remote strobes (I can’t think of the model number off the top of my head). Fire-Lite 6" bell (12VDC), U-MMT (sync strobe), an unknown heat which is was unknowingly damaged by the previous owner, and a classic Spectra.

My Benjamin horns:
From the left: 12 volt Faraday Type 2 (it’s labled 11f for voltage), IBM 4032-1B, IBM 4031-2B (behind), Benjamin Howler SWP, IBM 4030-2.

892-1B on the left, 892-2B on the left.

892-2B, 9838+9101, and 9838+9105 laying on the floor.

RS (yes, an RS not an RSS), and 2 Commander 3s.

4050+PR, and 120 volt Tork Alert horn after both were freshly painted (the paint is chipping off the Tork Alert).

BRK 2824 fresh out of the box with the tester card inserted.

892-1B and 894B-206

My fire alarm display built out of a bookshelf back when I lived with my parents (it’s now in the back of my storage bin per orders of my wife :lol: )

Going from top left: vertical strobe AS, IBM 4030-2, 7002T, 350, 4050+PR, FS 55, 4031-2B, the famous 120VAC Faraday Type 2, and the Tork Alert on the TV

The MS-4424B (I’ve since peeled off the “elevator fire panel” lettering) with the 2824, 4904-9101, and 4251-20.

P241575 which I mounted for grins at my parents. My mom was furious I mounted it, my step-dad didn’t care as long as it wasn’t hooked up (it wasn’t).

Edwards 360-L Fire Horn

6VAC 4040 on the left, 120VAC 350 with push button.

I have a few more that are more recent additions I need to get pics of so more to come.

Wow nice fire alarm collection. Thanks for sharing. You sure have lots.

Awesome! Welcome back to the forum. 8)

Nice collection!

Thanks for the post, welcome back!

Thanks for the warm welcome back :smiley: I got around to uploading a few more pics I had on Facebook, and took a few more I could easily access.

4903-9102 light plate

4904-9168 (non smart sync)

P2RK

4903-9217 (110cd)

4904-9136 (110cd)

757-5A-T Integrity

a like new 9838

the bleeping Exceeder. The horn works, the strobe doesn’t :evil:

Edwards 340 4" 110 VAC

450+VALS

Federal 31 110 VAC

EST 792-5A-006

2 110 VAC 2903+9525s

Wheelock DSM (box says “manufactured for Simplex”). I also have an MDL as well

Faraday 511 110 VAC

MAEH

National time 411 12 VAC

National time 411F (12 VAC) and pull

MIZ

newer SHG (sounds like a Commander, capable of code-3)

Simplex 4037-1 12VAC

4251-11 Chevron

Standard 50 12 VAC

WM1T

Standard pull

385-L on the left (20 VDC) and 384 on the right (110 VAC)

There’s still more I need to dig up.

1 Like