Help with wiring the Simplex 4606-9101 Remote Annunciator for the Simplex 4010

Post here if you need help with something related to fire alarms
Post Reply
jdmasterpiece_7
Registered User
Registered User
Posts: 4
Joined: Sat Mar 10, 2018 2:46 pm

Help with wiring the Simplex 4606-9101 Remote Annunciator for the Simplex 4010

Post by jdmasterpiece_7 » Sat Mar 10, 2018 2:59 pm

Hello everybody, I have been collecting and using fire alarms for a number of years and just recently switched to addressable panels. My second addressable panel I've purchased is the Simplex 4010. I plan to keep it and use it as a 'fire suppression system' in my collection. I also recently started purchasing annunciators too!

My problem that I'm having is that I cannot figure out how to wire the annunciator to the panel. I understand the N2 connections, but not how to power it. I haven't found any manuals for the 4606 and the 4010 manual leads to no where.

Any help would be greatly appreciated!

Thank you!

User avatar
Retired STR-SG
Moderator
Moderator
Posts: 739
Joined: Wed Jun 11, 2014 5:22 pm
Location: west TN
Contact:

Re: Help with wiring the Simplex 4606-9101 Remote Annunciator for the Simplex 4010

Post by Retired STR-SG » Sat Mar 10, 2018 3:15 pm

Go to this Dropbox link to download the 4010 field wiring drawings.
https://www.dropbox.com/s/2wpksgmb1ntm6 ... 8.pdf?dl=0

The information you need is on pages 7, 11, and 12.

I found a 4606-9101 installation instructions too.
https://www.dropbox.com/s/64g2oh2sqj6p4 ... 8.pdf?dl=0

jdmasterpiece_7
Registered User
Registered User
Posts: 4
Joined: Sat Mar 10, 2018 2:46 pm

Re: Help with wiring the Simplex 4606-9101 Remote Annunciator for the Simplex 4010

Post by jdmasterpiece_7 » Sun Mar 11, 2018 1:19 pm

Thank you so much for your help!

Post Reply