MS-9600UDLS wont boot up correctly

Post here if you need help with something related to fire alarms
Post Reply
Registered User
Registered User
Posts: 1
Joined: Thu Nov 01, 2018 4:45 am
YouTube Username: tbolt7000
Instagram: oahualarms

Sat Apr 13, 2019 6:16 pm

So I’m a little bit lost here... My fire lite MS-9600UDLS has been working fine for the past week, today I plugged in the panel after it’s been sitting off for a week, and upon applying power the panel began to beep, the trouble light came on, and all the characters on the screen are illuminated solid black. The screen stays illuminated, the characters all stay black and do not display words, and the trouble piezo continues to sound. I am unable to silence the piezo, panel is not responding to inputs. I have not damaged/mis-wired the panel in any way. It was working perfectly fine last time I powered it up. I do not have batteries for the panel yet. Any idea what could be causing the panel to do this? Please help!!
User avatar
Casual Participant
Casual Participant
Posts: 74
Joined: Wed Sep 21, 2016 10:11 pm
YouTube Username: HappyJigg

Mon Apr 22, 2019 9:43 pm

I would check to see if there is any damage or scratches on the board. Did you remove any knockouts? Are there debris in the cabinet? Is the correct voltage being supplied to the panel?
Have any questions or concerns about Silent Knight panels? Ask me! I own THREE of them!
Post Reply