The Fire Panel Forums

The Fire Alarm Authority
It is currently Sat Sep 22, 2018 9:28 pm

All times are UTC-04:00




Post new topic  Reply to topic  [ 4 posts ] 
Author Message
PostPosted: Fri Jan 05, 2018 2:06 pm 
Offline
Registered User
Registered User

Joined: Wed Jan 03, 2018 11:34 am
Posts: 2
YouTube Username: Fyr-Fyter
If anyone knows how to wire this smoke detector, please let me know.

In case anyone cannot see the last picture clearly enough. There are ten wires connecting to the back of the detector: two brown, two purple, one orange, one yellow, one white, one black, one blue, and one black with a yellow stripe.

Image

Image

Image

Image

Image


Top
   
PostPosted: Mon Jan 08, 2018 7:34 pm 
Offline
Moderator
Moderator
User avatar

Joined: Wed Jun 11, 2014 5:22 pm
Posts: 753
Location: west TN
Quote:
If anyone knows how to wire this smoke detector, please let me know.

In case anyone cannot see the last picture clearly enough. There are ten wires connecting to the back of the detector: two brown, two purple, one orange, one yellow, one white, one black, one blue, and one black with a yellow stripe.
I do not have printed information on these detectors, but I worked on installations that used these. I will tell you what I do know about the connections. It has a transformer on it so it is a 120 VAC detector. It looks like someone added a reset switch to it.
Black - 120 VAC hot.
White 120 VAC neutral.
Two brown - trouble contact.
Two Violet - alarm contact.
Orange, yellow, and blue - auxiliary alarm contact, but I don't remember which is C, N/O, or N/C.
Black with yellow stripe - don't remember.

BTW, the pictures do not come through with the post but I copied the addresses and pasted them into another browser tab and could see them. Don't know why that is.


Top
   
PostPosted: Fri Jan 12, 2018 5:19 pm 
Offline
Registered User
Registered User

Joined: Wed Jan 03, 2018 11:34 am
Posts: 2
YouTube Username: Fyr-Fyter
I am assuming that based on what you told me, one would wire a power source to the back and white wires. With the alarm contact wires wired in with the initiating loop?


Top
   
PostPosted: Fri Jan 12, 2018 7:52 pm 
Offline
Moderator
Moderator
User avatar

Joined: Wed Jun 11, 2014 5:22 pm
Posts: 753
Location: west TN
I dug and dug in my old information and found an original 4262-5 installation instructions. I will scan that later and PM you the link.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 4 posts ] 

All times are UTC-04:00


Who is online

Users browsing this forum: No registered users and 7 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited