The Fire Panel Forums

The Fire Alarm Authority
It is currently Sat Sep 22, 2018 4:36 pm

All times are UTC-04:00




Post new topic  Reply to topic  [ 2 posts ] 
Author Message
PostPosted: Fri Jan 05, 2018 4:28 pm 
Offline
Serious Participant
Serious Participant

Joined: Wed Dec 07, 2016 9:02 pm
Posts: 562
YouTube Username: firefreak57
Location: Summit County, Ohio
I recently acquired a brand new Edwards 1269-0A coded pull NOS; it is the newer type but it has the glass supervisory contact (I think) and also has the key switch on the side and 6 terminals on the terminal block. Unfortunately while it came brand new with all documentation there was no wiring instructions interestingly enough. So my question is how do I wire this one. Probably won’t be using the key switch or glass contact (if it even has one; it is the breakglass type but I’m not using the glass rod and have removed it) at this time but I don’t know how to wire it (the pull) due to the lack of wiring instructions. Any help would be greatly appreciated! Also it came without the Wall box which hopefully I can find one for it eventually, but that’s not real important right now. I just wanted to be able to make a video of it with one of my fire bells and possibly wire up the key switch at some point to make a full demo video of the unit as I am probably the first collector to get a coded pull station NIB and I’d like to make a full video of it demonstrating as many features as I can with it. Thanks!

_________________
The official account of firefreak57! Class of 2019.
Proud Owner of a Simplex 4004 Fire Alarm System
My YouTube Channel


Top
   
PostPosted: Mon Jan 08, 2018 10:50 am 
Offline
Serious Participant
Serious Participant

Joined: Wed Dec 07, 2016 9:02 pm
Posts: 562
YouTube Username: firefreak57
Location: Summit County, Ohio
Quote:
I recently acquired a brand new Edwards 1269-0A coded pull NOS; it is the newer type but it has the glass supervisory contact (I think) and also has the key switch on the side and 6 terminals on the terminal block. Unfortunately while it came brand new with all documentation there was no wiring instructions interestingly enough. So my question is how do I wire this one. Probably won’t be using the key switch or glass contact (if it even has one; it is the breakglass type but I’m not using the glass rod and have removed it) at this time but I don’t know how to wire it (the pull) due to the lack of wiring instructions. Any help would be greatly appreciated! Also it came without the Wall box which hopefully I can find one for it eventually, but that’s not real important right now. I just wanted to be able to make a video of it with one of my fire bells and possibly wire up the key switch at some point to make a full demo video of the unit as I am probably the first collector to get a coded pull station NIB and I’d like to make a full video of it demonstrating as many features as I can with it. Thanks!
Nevermind, I figured out the basic wiring, but if anyone knows how to hook up the key switch on these pulls and what they possibly do that would be awesome to hear! And also the model is 1269-0, not 0A since this one doesn’t have the glass tamper switch on it but has the key switch.

_________________
The official account of firefreak57! Class of 2019.
Proud Owner of a Simplex 4004 Fire Alarm System
My YouTube Channel


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 2 posts ] 

All times are UTC-04:00


Who is online

Users browsing this forum: No registered users and 8 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited