Page 1 of 1

How to reset Honeywell Vista 15P with keypad

Posted: Sat Oct 24, 2020 3:37 pm
by FireAlarmPanel347
Hello, I have recently got a Honeywell Vista 15P panel, and I would like to know how to factory reset it. If it's a code that needs to be sent via PM, then please send me it. Thanks!

Re: How to reset Honeywell Vista 15P with keypad

Posted: Sun Oct 25, 2020 1:58 am
by DownsLife+Safety
Alarmgrid seems to have a nifty explanation on how to do it. I'll DM you the information since it does have links to stuff that shouldn't be share publicly.

You should probably refer to its programming manual as well. Most panels will have instructions on how to factory reset the panel.

Re: How to reset Honeywell Vista 15P with keypad

Posted: Mon Nov 09, 2020 4:27 pm
by MrFireAlarm
Enter programming mode. This is done by punching in the installer code then 800. Now the keypad should say "Installer Code 20" or just 20. Punch In [REDACTED BY MODERATOR] then the panel will reset. If desired, Punch in *99 to exit programming.

Re: How to reset Honeywell Vista 15P with keypad

Posted: Sat Dec 12, 2020 10:33 pm
by TheAlmightyZach
Topic moved from General Security to Security system help. Also remember NOT to share any default codes publicly - Keep them in Private Messages please.