It’s been a while since I posted pics of my collection. It’s much bigger than it was so I’ll go over what I have, and post some pics I have laying around.
Panel: The trusty MS-4424B. I’ve had it now for close to 12 years, and have had it powered up for 8 years with a 4251-20, genesis chime/strobe, i3, and Honeywell labled 2400 hooked up, all will be finally installed properly sometime next year.
Now for a general assortment of pics: WARNING: picture overload
Assorted alarms thawing after my back patio leaked and froze a few winters ago. Despite some ice in some of the strobes nothing was damaged. In this pile you’ll see: P2RK, a P2R which I no longer have, 9838, several 4051s, older 350, newer 350+PR2, Amseco motor horn, FS HOS strobe, several GX-93R GMH, and SHGs, 874 Adaptahorn attached to a push button, IBM 4031-2B, Auth electric horn (single goose neck), 34T, 34, MA/SS (set to slow whoop), PA400R in it’s box, 4251-20, a dead EST strobe (wires were cut down to the board by the previous owner), 2 MT4-LSM (set to code-3 horn), AS, EHS-DL1, Several simplex remote strobes (I can’t think of the model number off the top of my head). Fire-Lite 6" bell (12VDC), U-MMT (sync strobe), an unknown heat which is was unknowingly damaged by the previous owner, and a classic Spectra.
My Benjamin horns:
From the left: 12 volt Faraday Type 2 (it’s labled 11f for voltage), IBM 4032-1B, IBM 4031-2B (behind), Benjamin Howler SWP, IBM 4030-2.
892-1B on the left, 892-2B on the left.
892-2B, 9838+9101, and 9838+9105 laying on the floor.
RS (yes, an RS not an RSS), and 2 Commander 3s.
4050+PR, and 120 volt Tork Alert horn after both were freshly painted (the paint is chipping off the Tork Alert).
BRK 2824 fresh out of the box with the tester card inserted.
892-1B and 894B-206
My fire alarm display built out of a bookshelf back when I lived with my parents (it’s now in the back of my storage bin per orders of my wife :lol: )
Going from top left: vertical strobe AS, IBM 4030-2, 7002T, 350, 4050+PR, FS 55, 4031-2B, the famous 120VAC Faraday Type 2, and the Tork Alert on the TV
The MS-4424B (I’ve since peeled off the “elevator fire panel” lettering) with the 2824, 4904-9101, and 4251-20.
P241575 which I mounted for grins at my parents. My mom was furious I mounted it, my step-dad didn’t care as long as it wasn’t hooked up (it wasn’t).
Edwards 360-L Fire Horn
6VAC 4040 on the left, 120VAC 350 with push button.
I have a few more that are more recent additions I need to get pics of so more to come.