Motion sensor question?

Post here if you need help with something related to security systems.
Forum rules
Do NOT publicly post default codes for ANY security system or fire alarm panel.
(Rule #8)
User avatar
Casual Participant
Casual Participant
Posts: 120
Joined: Thu Jun 04, 2015 11:05 am
YouTube Username: Nick Tech99
Location: USA

Wed Oct 07, 2015 11:48 am

That is what I figured, thanks for the help.
Nick H.
Collector and Installer of Fire Alarm and Security Systems
:arrow: Contact:
New Participant
New Participant
Posts: 7
Joined: Sun Dec 03, 2017 2:56 pm

Thu Feb 01, 2018 9:02 pm

I know this is an old thread, but I felt that I should put in my two cents based on real world, on-the-job experience.

An e-call system with smoke warning for senior living facilities which I serviced at my former job used UTP wire exclusively. Either cat3 or cat5. The current draw on the corridor wireless pendant receivers was high enough that the manufacturer recommended pair 1 for the serial data and tripling the power with the remaining 3 pairs. Their engineering department figured the effective gage was nearly 18 awg.
Post Reply